DeMuth, Steel Products
Open Site Navigation

Silo Chutes

Fiberglass

Fiberglass

DeMuth's Fiberdome chute is designed and engineered to be installed on most type silos. Its structure allows it to withstand the toughest beating the weather elements or silo unloading systems can possibly dish out.

The chute is constructed in full 7-1/2' sections to minimize the number of joints. Connecting joints have a 2-1/2" tongue and groove design to keep feed in and water out. The large ribbed construction adds stability and strength. Rails are interchangeable.

Bolt On

Bolt on

Special Left and Right Rails bolt to chute edges. Chute clips attach rails to silo rods at any position along rails. Lock seams connect adjacent sheets. Chute aprons can be notched for close fit around rods. COMPLETE Hardware is boxed for ease of shipping and inventory control. Available in galvalume or white. Thickness is .022" minimum!

Sealtite

Sealtite

Special Rails bolt to chute edges. Sheets are clamped to silo rods during installation. "S" lock seams connect adjacent sheets. Projecting, flattened edges of chute can be notched for close fit around rods. Rails are interchangeable, right and left are supplied. Hardware is supplied with chute. Available in galvalume or white. Thickness is .022" minimum!

Ball Type Rail

Ball type rail

Stamped edges of chute fit into silo wall on either side of doorframes as silo is built. DeMuth "S" lock seams connect adjacent sheets. Hardware is supplied with chute. Available in galvalume or white.

Conception

|

​© 2021 DeMuth Steel Products Inc - All rights reserved